This is default featured slide 2 title
This is default featured slide 3 title
This is default featured slide 4 title
 

Common Mistakes in Label Artwork

1. Missing Fonts

This has been a common problem with artwork since we moved to digital file preparation over a decade ago. You might have this wonderful fancy font in your artwork, but if your printer doesn’t have it, when they open your file they will get an error message. The best way around this is to always outline your fonts before sending in your file.

2. Missing Bleed

If you want your color to print all the way to the edge of your label you need to include a bleed. For example, if you want to print a 3″ x 5″ label, the size of the artwork you would create would be 3.125″ x 5.125″. Also, you need to leave some space around the very edge of your label that is free of text. The reason this is needed is because during die-cutting the label material can drift ever so slightly (up to 1/32″), so you need to make allowances for this in your artwork.

3. RGB vs CMYK

Most digital color printers today (including your little desktop inkjet) print in CMYK, also known as four color process. However, all computer monitors display color as RGB (Red-Green-Blue). Now if you create your file for the RGB color space, the color is going to look different when printed on a CMYK printer, so it is always a good idea to create your artwork as CMYK. You should request a press proof if color is very important to you.

4. Improper File Resolution

Many times people send a file of a picture or graphic that was on their web site and expect their printer to create a nice looking label from it. Unfortunately, in most cases the file on the web site is very low resolution, often as low as 72 dpi. If a file is printed at that resolution it is going to look terrible, a resolution of 300 dpi is recommended for best results.

5. Tight Borders

If you want a thin border on your labels that prints right near the edge, or bleeds off the edge you are just asking for trouble. While label printing technology has advanced a great deal, there is still some very slight movement when printing and die-cutting your labels. While this movement is only a very small fraction of an inch, if your border is near the edge of the label it will be noticeable. Our advice, if you really want a border, is to make it a thick one (more than 4 point). That way the slight movement will be much less noticeable.

6. Spelling and Typing Mistakes

This one should really go without saying, but because it is so common it has been included here. While your printer will sometimes catch mistakes, it is up to you to check your label artwork carefully. You can never proofread enough – even when you are sure it is correct, check it one more time. Sometimes we print beautiful labels only to discover a spelling mistake after the fact. You can save yourself disappointment and expense by spending extra time making sure all your text is correct.

7. Missing Graphics/Links

If you are using a newer version of Photoshop or Illustrator (CS or CS2) this is less of a problem, but for people using older versions it is still a major issue. All your graphic elements should be embedded into your document before sending them for production, otherwise when your file is opened there may be missing graphics or links.

8. Unsupported Software Format

There are dozens of different software programs you can use to design your labels. A trip to your local CompUSA will give you plenty of inexpensive choices, but these packages typically use proprietary formats that are designed to be used only on your desktop printer. Most of them cannot be used on a professional label printing press. Most printers have artwork specs on their web site, but you will always be better off if you use the graphic industry standard programs: Adobe Photoshop or Illustrator. These packages create high quality art that will produce the best quality custom label. If you don’t have this software, then make sure you can export into a standard graphics format such as EPS, TIF or a hi-res JPEG.

9. Color Expectations

Many people create their label artwork and then print it out on their inkjet or laser printer, thinking this is how their labels will look. But anyone who owns more than one different printer knows that color can look vastly different between printers. If color is important to you we recommend you request a press proof – this way you will see exactly what your labels will look like when printed on our press. Some digital label printers, including our shop, will include a press proof free of charge.

10. Incorrectly Sized Artwork

Sometimes artwork is received where the size of the art does not match the size of the requested label. This may be intentional but if so, make sure you send complete instructions. Is extra white space needed? Is the label supposed to be centered, or should we be cropping the label to make it fit the desired size? If your artwork is a different size than the requested label please include detailed instructions with your order.